Flat gate valve without diversion hole
Product overview
General model: Z43WF, Z543WF
Nominal diameter: DN50-DN1000mm
Nominal pressure: 1.6mpa-10.0mpa
Applicable temperature: - 20 ℃ - 120 ℃
Valve body material: carbon steel, cast steel
Applicable media: water, natural gas, oil
Transmission mode: hand wheel, electric, pneumatic
Gate valve standard: JB/T5198-1991
Inspection and test: JB/T9092-1999
Pressure test: GB/T13927-1992
Flange standard: JB/T79.1-79.2 -1994
Product overview
Flat gate valves without diversion holes are widely used in transmission pipelines such as natural gas, petroleum, chemical industry, environmental protection, urban pipelines and gas pipelines, vent systems and steam storage devices as hoisting equipment. It is especially suitable for long-distance pipelines for natural gas exploitation and purification. The sulfur resistant series products are suitable for long-distance natural gas transmission pipelines with hydrogen sulfide containing medium, fast flow rate, many impurities and serious corrosion.
Structural features
1. The valve body has two structures: Casting and welding. The short flat gate valve without diversion hole adopts welded structure, with short structural length and light weight, which is especially suitable for devices requiring light weight.
2. The structure of floating valve seat makes the inlet and outlet of the valve sealed in both directions.
3. The valve seat seal is a double sleeve seal with the function of double sealing. PTFE can remove sand impurities and dirt by itself to ensure that the seal is intact.
4. For the valve with hard sealing structure, the sealing surface is overlaid with Co based cemented carbide, and the hardness reaches hrc44-52 to ensure the reliability of sealing.
5. For the valve with diversion hole structure, regardless of the fully open or fully closed state, the gate and valve seat are always in contact with each other, and the sealing surface is not directly scoured by the medium, so as to prolong the service life.
6. The fire resistance design of the valve shall comply with the standards of APL 6fa and API 607. For the valves used for hydrocarbon flow liquid and oil and gas pipelines, this standard shall be implemented to meet the fire protection requirements.
7. When the valve is fully open, the channel is a straight pipeline, the flow resistance coefficient and pressure loss are very small, and the pipeline can be cleaned by wool ball.
8. The valve is equipped with automatic pressure relief protection device to ensure safe use.
9. Fully enclosed structure, good protection performance, can be used all day.
Main overall connection dimensions
PN16 | |||||||||||||||||||||
DN(mm) | L | D | D1 | D2 | D0 | f | b | H | H1 | Z-φd | |||||||||||
50 | 178 | 165 | 125 | 102 | 250 | 2 | 20 | 85 | 450 | 4-φ18 | |||||||||||
65 | 190 | 185 | 145 | 122 | 300 | 2 | 22 | 91 | 550 | 8-φ18 | |||||||||||
80 | 203 | 200 | 160 | 138 | 350 | 2 | 24 | 109 | 610 | 8-φ18 | |||||||||||
100 | 229 | 235 | 190 | 162 | 350 | 2 | 24 | 121 | 700 | 8-φ22 | |||||||||||
125 | 254 | 270 | 220 | 188 | 350 | 2 | 26 | - | - | 8-φ26 | |||||||||||
150 | 267 | 300 | 250 | 218 | 400 | 2 | 28 | 178 | 895 | 8-φ26 | |||||||||||
200 | 292 | 360 | 310 | 278 | 450 | 2 | 30 | 211 | 1130 | 12-φ26 | |||||||||||
250 | 330 | 425 | 370 | 335 | 500 | 2 | 32 | 215 | 1290 | 12-φ30 | |||||||||||
300 | 356 | 485 | 430 | 395 | 305 | 2 | 34 | 245 | 1480 | 16-φ30 | |||||||||||
350 | 381 | 555 | 490 | 450 | 305 | 2 | 38 | 280 | 1660 | 16-φ33 | |||||||||||
400 | 406 | 620 | 550 | 505 | 305 | 2 | 40 | 310 | 1850 | 16-φ36 | |||||||||||
450 | 432 | 670 | 600 | 555 | 305 | 2 | 46 | 346 | 2080 | 20-φ36 | |||||||||||
500 | 457 | 730 | 660 | 615 | 305 | 2 | 48 | 363 | 2300 | 20-φ36 | |||||||||||
600 | 508 | 845 | 770 | 720 | 305 | 2 | 58 | 442 | 2680 | 20-φ39 | |||||||||||
700 | 610 | 960 | 875 | 820 | 305 | 2 | 50 | 505 | 3080 | 24-φ42 | |||||||||||
800 | 660 | 1085 | 990 | 930 | 305 | 2 | 54 | 560 | 3491 | 24-φ48 | |||||||||||
900 | 711 | 1185 | 1090 | 1030 | - | 2 | 58 | 610 | 3897 | 28-φ48 | |||||||||||
1000 | 811 | 1320 | 1210 | 1140 | - | 2 | 62 | 715 | 4317 | 28-φ55 | |||||||||||
PN25 | |||||||||||||||||||||
DN(mm) | L | D | D1 | D2 | D0 | f | b | H | H1 | Z-φd | |||||||||||
50 | 178 | 165 | 125 | 102 | 250 | 2 | 18 | 85 | 450 | 4-φ18 | |||||||||||
65 | 190 | 185 | 145 | 122 | 250 | 2 | 18 | 91 | 550 | 8-φ18 | |||||||||||
80 | 203 | 200 | 160 | 138 | 250 | 2 | 20 | 109 | 610 | 8-φ18 | |||||||||||
100 | 229 | 220 | 180 | 158 | 300 | 2 | 20 | 121 | 700 | 8-φ18 | |||||||||||
125 | 254 | 250 | 210 | 188 | 350 | 2 | 22 | - | - | 8-φ18 | |||||||||||
150 | 267 | 285 | 240 | 212 | 350 | 2 | 22 | 178 | 895 | 8-φ22 | |||||||||||
200 | 292 | 340 | 295 | 268 | 350 | 2 | 24 | 211 | 1130 | 12-φ22 | |||||||||||
250 | 330 | 405 | 355 | 320 | 400 | 2 | 26 | 215 | 1290 | 12-φ26 | |||||||||||
300 | 356 | 460 | 410 | 378 | 450 | 2 | 28 | 245 | 1480 | 12-φ26 | |||||||||||
350 | 381 | 520 | 470 | 428 | 500 | 2 | 30 | 280 | 1660 | 16-φ26 | |||||||||||
400 | 406 | 580 | 525 | 490 | 305 | 2 | 32 | 310 | 1850 | 16-φ30 | |||||||||||
450 | 432 | 640 | 585 | 550 | 305 | 2 | 40 | 346 | 2080 | 20-φ30 | |||||||||||
500 | 457 | 715 | 650 | 610 | 305 | 2 | 44 | 363 | 2300 | 20-φ33 | |||||||||||
600 | 508 | 840 | 770 | 725 | 305 | 2 | 54 | 442 | 2680 | 20-φ36 | |||||||||||
700 | 610 | 910 | 840 | 795 | 305 | 2 | 42 | 505 | 3080 | 24-φ36 | |||||||||||
800 | 660 | 1025 | 950 | 900 | 305 | 2 | 42 | 560 | 3491 | 24-φ39 | |||||||||||
900 | 711 | 1125 | 1050 | 1000 | 250 | 2 | 44 | 610 | 3897 | 28-φ39 | |||||||||||
1000 | 811 | 1255 | 1170 | 1115 | 250 | 2 | 46 | 715 | 4317 | 28-φ42 | |||||||||||
PN40 | |||||||||||||||||||||
DN (mm) | L | D | D1 | D2 | Y | D0 | f | f2 | b | H | H1 | Z-φd | |||||||||
50 | 216 | 165 | 125 | 102 | 88 | 250 | 2 | 4 | 20 | 100 | 458 | 4-φ18 | |||||||||
65 | 241 | 185 | 145 | 122 | 110 | 250 | 2 | 4 | 22 | 106 | 555 | 8-φ18 | |||||||||
80 | 283 | 200 | 160 | 138 | 121 | 250 | 2 | 4 | 24 | 124 | 615 | 8-φ18 | |||||||||
100 | 305 | 235 | 190 | 162 | 150 | 300 | 2 | 4.5 | 24 | 146 | 710 | 8-φ22 | |||||||||
125 | 381 | 270 | 220 | 188 | 176 | 350 | 2 | 4.5 | 26 | - | - | 8-φ26 | |||||||||
150 | 403 | 300 | 250 | 218 | 204 | 350 | 2 | 4.5 | 28 | 206 | 900 | 8-φ26 | |||||||||
200 | 419 | 375 | 320 | 285 | 260 | 350 | 2 | 4.5 | 34 | 241 | 1135 | 12-φ30 | |||||||||
250 | 457 | 450 | 385 | 345 | 313 | 400 | 2 | 4.5 | 38 | 303 | 1401 | 12-φ33 | |||||||||
300 | 502 | 515 | 450 | 410 | 364 | 450 | 2 | 4.5 | 42 | 372 | 1580 | 16-φ33 | |||||||||
350 | 762 | 580 | 510 | 465 | 422 | 500 | 2 | 5 | 46 | 405 | - | 16-φ36 | |||||||||
400 | 838 | 660 | 585 | 535 | 474 | 305 | 2 | 5 | 50 | 450 | - | 16-φ39 | |||||||||
450 | 914 | 685 | 610 | 560 | 524 | 305 | 2 | 5 | 57 | 490 | - | 20-φ39 | |||||||||
500 | 991 | 755 | 670 | 615 | 576 | 305 | 2 | 5 | 57 | 520 | - | 20-φ42 | |||||||||
600 | 1143 | 890 | 795 | 735 | 676 | 305 | 2 | 6 | 72 | 600 | - | 20-φ48 |